Popular Model
Multivac T 800 Tray Sealer Financing
Finance a Multivac T 800 tray sealer for high-speed fresh food packaging. Application-only up to ~$400k. New and used T 800 tray sealers for protein, produce, and prepared food lines.
Start Review
Tray sealing is a different production model than thermoforming from rollstock, and the Multivac T 800 represents the high-speed end of the tray sealer category. Rather than forming packaging from film on the machine, the T 800 seals pre-formed rigid or semi-rigid trays, which allows it to operate at cycle speeds that thermoformers cannot match on equivalent footprints. On high-volume fresh protein, produce, or prepared food lines where throughput is the primary objective and the tray geometry is fixed, the T 800's speed advantage over rollstock thermoformers is the deciding factor in equipment selection. Financing a T 800 is an investment in throughput that the line needs now, not after a protracted bank credit process.
The T 800 handles both MAP (modified atmosphere packaging) and non-MAP tray formats depending on configuration, with sealing tool sizes up to 800mm by 300mm per station on standard builds. It uses a servo-driven transport system with lane-based tray indexing that maintains precise spacing and positioning through the sealing cycle. The machine integrates with upstream denesting systems, conveyor infeed from filling or portioning stations, and downstream checkweighers and labelers to form a complete tray-sealing line. Multivac offers the T 800 in inline and rotary configurations to accommodate different line layouts and throughput requirements. Our Multivac financing program covers the full T series tray sealer range, including the T 200, T 300, and T 800 configurations.
Where T 800 Tray Sealers Operate
Fresh poultry and ground beef packaging is the largest T 800 application category. Major poultry processors and beef fabricators running retail-ready case-ready programs use high-speed tray sealers to seal hundreds of trays per minute across multiple lanes. The T 800's speed and multi-lane capability, combined with the ability to run MAP gas flush on consumer fresh protein packs, make it the equipment of choice for retail-ready programs where packaging speed and shelf-life extension are simultaneously required.
Fresh produce in rigid trays, particularly salad kits, berry punts, and prepared vegetable mixes for club and grocery retail, also uses the T 800 platform. Produce packaging lines running at high case rates per hour need a tray sealer that matches their upstream filling and assembly speeds without becoming the downstream bottleneck. The T 800's throughput characteristics fit the produce packing context without the film waste and forming time penalties of rollstock thermoforming.
Prepared food processors packaging single-serve entrees, meal kits, and protein-based prepared foods in rigid trays represent the third major segment. These operations often run shorter production campaigns on a wider variety of SKUs, which makes the T 800's quick tooling changeover system a practical requirement rather than a nice-to-have. Processors in Food & Beverage Manufacturing and in Contract Packaging & Co-Packers both appear regularly in T 800 financing conversations, often with different transaction structures that reflect their different cash flow and ownership profiles.
T 800 Capital Cost and Financing Structures
A new Multivac T 800 in standard MAP configuration runs $150,000 to $400,000 depending on lane count, sealing tool size, gas management options, and integration scope. High-speed multi-lane systems with full denesting, conveyor integration, and downstream checkweigher typically reach the higher end of that range. Used T 800 machines with documented maintenance histories trade landing between $60k and $175k, with the spread driven by age, configuration, and current condition.
For most T 800 transactions, the amount falls within our application-only threshold, which means an approval decision without full financial statements. A completed credit application and equipment specification are the starting point. For larger integrations approaching or above $400,000, three months of bank statements join the package. Terms run 36 to 72 months depending on the transaction structure and the operator's preference. Fixed monthly payments are standard; skip-payment or seasonal structures are available when the production calendar has pronounced seasonality, as it often does in fresh produce and holiday-driven prepared food programs.
For operations that want to maximize year-one tax efficiency, financing a T 800 through a loan or dollar-buyout lease preserves eligibility for Bonus Depreciation Financing for Production Line Equipment treatment, which can materially reduce the net first-year cost of the asset. We work with your tax advisor to structure the transaction in a way that captures the available deduction without compromising the credit terms.
Sale-Leaseback and Refinancing for Existing T 800 Assets
A T 800 that has been running in a protein or produce plant for several years and is owned free and clear has real market value. Rather than letting that value sit idle on the balance sheet while the business needs capital for raw material, expansion, or a new line installation, a sale-leaseback converts the machine's equity into cash. The T 800 stays in production under the leaseback terms; the business gets a working capital injection without taking on new equipment debt.
Equipment refinancing on a T 800 with a remaining loan balance works differently: we pay off the existing loan and establish new terms at a lower rate, extended term, or higher loan amount depending on the current market value relative to the payoff. For processors who financed a T 800 several years ago at rates that no longer reflect current market conditions, refinancing can reduce the monthly obligation and free up cash flow for other uses. Our Equipment Refinancing program handles both scenarios, and we routinely work on T 800 assets alongside other packaging equipment in the same plant.
Start the Financing Process for Your T 800
Tell us the configuration, the production context, and whether you are buying new or sourcing used. We will structure a transaction that matches the throughput economics of the machine and the cash flow of the operation. Processors evaluating a T 800 tray sealer alongside a Multivac R 145 rollstock thermoformer for smaller-volume specialty food formats should raise that comparison before the financing structure is finalized. Contact us today for an initial term sheet.
Questions About Multivac T 800 Tray Sealer Financing
Clear answers on equipment eligibility, documentation, timing, and transaction structure before you send the file.
Can I finance a T 800 purchased from a poultry plant that closed?
Plant-closure equipment purchases are a common source of well-maintained T 800 units at below-market prices. We finance these transactions when the machine has identifiable provenance and we can establish current market value through an appraisal or comparable sales. A plant closure sale does not disqualify the asset from financing; it just requires a bit more documentation on the machine's condition and service history.
We run a seasonal produce packaging operation. Can the payment be lower during our off-season months?
Seasonal payment structures are available for qualified borrowers in production-agriculture and seasonal food processing contexts. A skip-payment structure or a step-up/step-down payment schedule can align the debt service with your actual cash flow pattern. This is worth discussing at the start of the financing conversation so we can build it into the initial term sheet rather than negotiating it after the fact.
The T 800 I want includes a custom denester and conveyor integration. Can all of that be financed together?
Yes. Ancillary equipment like denesters, conveyors, and checkweighers can be bundled into the T 800 financing transaction when they are part of the same line project. A bundled transaction simplifies the documentation and produces a single monthly payment that covers the full project scope.
How is the T 800 different from the R 245 for fresh protein packaging purposes?
The T 800 seals pre-formed trays and operates faster on high-volume fixed-tray formats. The R 245 thermoforms from rollstock film, which provides more flexibility on tray geometry at the cost of forming time and film waste. The right choice depends on whether your tray geometry is fixed or variable and whether throughput speed or format flexibility is the primary production driver.
What credit profile is required to finance a T 800 in the $200,000 range?
At $200,000, most T 800 transactions qualify for application-only underwriting. A solid business credit profile with no recent tax liens or judgments against the business is the standard baseline. Businesses with B/C credit that have a genuine production need and strong equipment collateral can often find a viable structure, even if the terms are slightly different from a prime-credit transaction.
Finance Your Multivac T 800 Tray Sealer Financing
Send the equipment quote, seller details, price, deposit, and delivery schedule. The financing desk will review the file and return a practical next step.